RM Solar S Class 20 Pro Bedienerhandbuch PDF herunterladen (Seite 66)

Section 4 - In Roof Frame Installation

Mounting The Flashings

At this point measure diagonally across the panels. The two measurements should be the same to

ensure the panels are square. A must equal B.

Mount the wooden latts supplied down the sides (and middle is using 2 or more panels) of the

panels using the 3 x large wood screws supplied (5x110mm). The wooden latts should be positioned

200mm from the bottom of the panels and should screw to the battens with a screw at the top middle

and bottom. The latts require pilot holes to prevent splitting.

The latts are tapered and the 90mm end goes to the top of collector array with the 95mm end going

to the bottom.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 87 88

Keine Kommentare

RM Solar S Class 20 Pro Bedienerhandbuch Seite 66