RM Solar S Class 20 Pro Bedienerhandbuch PDF herunterladen (Seite 44)

Section 4 - In Roof Frame Installation

Mounting Top Angled Timber Wedge

Place top timber wedge (9) under each collector, align them and secure each with 2 screws 5x110

(24). Connect collector connections as shown in the collector installation manual. Make sure to do a

quick A = B measurements on the panels to ensure they are square.

NOTE: Pressure test the panels and insert temperature sensor into R/H panel. The panels should

be pressure tested to 6.5 bar using either compressed air, or glycol, DO NOT USE WATER. If using

glycol cover the panels for the duration of the test.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 87 88

Keine Kommentare

RM Solar S Class 20 Pro Bedienerhandbuch Seite 44